 |
NEW CONCEPTS & SYSTEMS offers Digital Coatmeter-C. The instrument is designed on principle of eddy current according to DIN 50984, 50982 and ISO 2360. It measures thickness of Non - conductive coating on conducting base.
It is useful for measurement of coating of Phosphates, Paint, Varnishes, Teflon, Enamel, Glass, Rubber, FRP etc. on MS, SS, Brass, Aluminium etc. and Anodising of Aluminum. |
The Instrument is quite user freindly. Calibration is easy with ZERO and CAL knobs. Testfoils and Testpiece are supplied with instrument which help the user to set the instrument to the utmost accuracy.
The instrument has spring loaded probe for constant force. The probe has V groove for cylindrical parts.
The masuring range of the Standard Model(DCM-C) is 0-1200 Micron with resolution of 1 Micron throughout the range.Other model with measuring range of 0-4mm (Model:DCM-C4) is also available.The reading is displayed on LCD display. The instrument works on 9 Volts dry battery and it has a separate indicator for Battery check. Auto OFF facility is incorporated to extend the Battery life. |
| |
| Technical Specifications : |
| Measuring Range |
0 to 1200 Microns |
| Resolution |
1 Micron throughout range |
| Accuracy |
 2% When calibrated close to the thickness to be measured
 2 Microns for low thickness values |
| Minimum Measuring Area |
11 mm dia |
| Minimum Curvature Radius |
Convex 11 mm, Concave 30 mm |
| Minimum Thickness of Base |
0.3 mm (For thickness less than 0.3 mm, calibration on similar type of base is required. Base thickness lower than specified reduces the accuracy). |
| Power Supply |
Dry Battery - 6LF22 - 1 x 9 Volts or Rechargeable NiCd - 1 x 9 Volts or Mains 230 (50Hz) with 1 x 9 Volts Adaptor |
| Supply Check |
Battery to be replaced when display shows 'LOBAT' indication |
| Battery Life |
6LF22 9v Dry Battery 30 hours, Rechargeable NiCd Battery 7 hours.(When used continously) |
| Ambient Temperature |
0o to 50o C |
| Dimensions (mm) |
a) Instrument - 40 x 155 x 85
b) Probe - 21 dia x 65 Length |
| Weight (gms) |
a) Instrument - 230 gms
b) Probe - 60 gms |
| Warranty |
1 year against any manufacturing defects |
|
 |
Digital Coat Meter - M is designed for measuring non magnetic coating on magnetic (ferrous) base material such as M.S. The standard model DCM-M is available with 0-1200 micron range. Other models with range of 0-6mm (Model:DCM-M6) and 0-12mm (Model:DCM-M12) are also available. The instrument has an excellent calibration facility with zero and cal + & - membrane switches. Test foils and testpiece are provided to facilitate the user to set the instrument to utmost accuracy. The instrument has spring loaded probe for constant force. The probe has V groove for cylindrical parts. The Instrument has an Auto Off facility extend the Battery life. |
| Technical Specifications : |
| Measuring Range |
0 to 1200 Microns |
| Resolution |
1 Micron |
| Accuracy |
2% 2 microns |
| Minimum Area |
11 mm |
| Minimum Curvature |
30 mm dia. Concave
3 mm dia. Convex |
| Min. Base Thickness |
0.3 mm. |
| Power Supply |
Dry Battery 9 V. (6 F 22) |
| Supply Check |
Indication BAT to Replace Battery |
| Ambient Temperature |
0o to 50o C |
| Dimensions (mm) |
a) Instrument - 155 x 85 x 32
b) Probe - 21 dia x 60 Length |
| Weight (gms) |
a) Instrument - 300 gms
b) Probe - 60 gms |
| Warranty |
1 year. |
|
 |
Digital Coatmeter M&C
Digital Coatmeter M&C is a combination of both Digital Coatmeter M and C model. The Display unit is common but it has two separate probes for “M” application and “C” application. All other technical features and specifications are same as described above for individual M and C models. Two different calibration sets are provided with the Meter. Measurement of 0-1500 microns coating thickness can be carried out with resolution of 1 micron. (Refer to other specifications as above).
|
|
Our Services
|
